Wrangler YJ
Made from 3mm Aluminum Composite Panels (ACP), these door panels are a lightweight, rigid and customizable alternative to factory cards. These panels are custom printed and clear-coated for long-lasting color and protection.
These fit ‘82-’95 Jeep CJ7, CJ8 and YJ with full steel doors.
Free Shipping! Delivery in 5-7 business days.
If you would like to order with a custom graphic, please Contact Us.
Rigid Yet Lightweight - Won’t warp, crack, or absorb moisture
Weather-Resistant - Ideal for open-top rigs, trail use, and daily driving
Refined Finish - Clean edges and a professional look
Customizable - Choose from a selection of pre-made designs, or send in your own image or artwork for custom printing.
Each panel comes pre-drilled for the grab handle and window crank. No other fastener holes are pre-drilled, allowing the end user to choose their preferred mounting method and fastener locations based on their specific vehicle and desired finish. We recommend test-fitting the panel and marking your preferred attachment points before final installation.
Common installation options include:
Automotive-grade VHB double-sided foam tape (clean finish but makes removal much more difficult)
Velcro
Plastic push-in fasteners (drilling required)
Rivets (drilling required)
Threaded Hardware / Rivet Nuts (drilling required)
Self-Tapping Screws
Use caution when installing new fasteners. Screws or bolts that are too long may interfere with the functions of the door and window.
Please keep in mind that the door panels may need to be removed to service components inside the door. Standard rivets or adhesive options may be difficult to remove.
These panels are meant to fit into the factory J-trim. We do not recommend installing them if the J-trim is missing from the door.
This product is designed and intended for off-road use only. It is not manufactured, tested, or certified for use on public roads or highways. The installer and user assume all responsibility for proper installation, use, and compliance with applicable laws and regulations. Product may require modification to install.
A creative mounting solution for lights, CBs, switch boxes, dash cams, GPS and more. Made from 2020 aluminum extrusion, this accessory rail mounts using the existing sun visor bolt holes and fasteners. The sun visors are relocated to the rail. Comes with (12) pairs of M5 bolts and T-nuts for relocating the visors and adding accessories. Fits 1987-1995 Jeep Wrangler.
Free Shipping! - 5-10 Business days
Rail, brackets and hardware ONLY. Does not come with any additional accessories.
This product is designed and intended for off-road use only. It is not manufactured, tested, or certified for use on public roads or highways. The installer and user assume all responsibility for proper installation, use, and compliance with applicable laws and regulations.
This switch panel replaces the radio in your ‘87-’95 YJ with a Bluetooth/Aux receiver module, 2 illuminated rocker switches and a dual USB charge port. The panel screws directly to the dash frame in place of the original radio, requiring no permanent modifications to the dash frame or bezel. The panel itself is 3D printed in-house from ASA and the Bluetooth module/switches are sourced from third-party suppliers.
Free Shipping to the lower 48!
These are made to order. Please allow up to 15 business days for delivery.
Rocker Switches: 5 PIN SPST Illuminated Rocker Switches, 12V DC / 20A
Bluetooth Module: Bluetooth 5.0 Audio Amplifier Board, 100W x 2 Channels
P/N: YJ-RDSP - R2-C1-BT
These radio delete switch panels are 3D printed in-house and made specifically for the 1987-1995 Jeep Wrangler YJ. The panel screws directly to the dash frame in place of the original radio, requiring no permanent modifications to the dash frame or bezel. We offer blanks, as well as assembled options with your choice of switches and charge ports.
YJ-RDSP - T5B: A blank panel made to fit (5) standard 0.5”/12mm toggle switches.
YJ-RDSP - R5B: A blank panel made to fit (5) standard 1.450" x 0.830" / 36.83mm x 21.08mm rocker switches.
YJ-RDSP - R4-C1: An assembled panel with (4) illuminated rocker switches and (1) USB outlet/voltmeter.
Free Shipping! 5-10 Business Days
The standard switches and parts included with these assemblies are imported economy-grade hardware. Some switches and accessories may be available in different colors.
If you would like different colors or accessory combinations, please Contact Us for a custom panel.
Dashboard switch panel for 1987-1995 Jeep Wrangler YJ, located underneath the speedometer. Replaces factory switch panel/blank with 3 rocker switch cutouts. Switch cutouts fit factory switches and common aftermarket rockers. These are 3D printed in-house using PETG. Our design incorporates significant strength and rigidity improvements over the original factory component. If you have any questions, please contact us before purchasing.
A heavy duty variant of our Radio Delete Switch Panel featuring U.S. made mil. spec. SPST-NO washdown-rated toggle switches (x5). The panel is 3D printed in-house using ASA, a weather-stable plastic known for its resistance to UV degradation and temperature-related fatigue. Suitable for overland, competition, or other applications where dependability is a top priority.
Fits: 1987-1995 Jeep Wrangler YJ
Made to order, please allow up to 10 business days for production and up to 5 business days for shipping.
Warranty: Includes a 1-year limited warranty covering defects in parts, materials and workmanship. For more details, please see our Warranty Policy
Toggle Switches:
Meets MIL-S-3950, UL Recognized Component, CSA Certified, CE Marked
Max Voltage - 28V DC, 125V AC
Switching Current - 10 A @ 125 V AC, 15 A @ 28 V DC
Country of Origin: United States
Switch Guards:
Color - Red
Meets MIL-G-7703 (MS25224-1)
Country of Origin: Mexico